Controls

Pitching Controls – Pinpoint Interface

To use PINPOINT PITCHING, start by selecting your PITCH TYPE and moving the L to your desired location in the zone. Next, a gesture meter displays with the pattern you must follow for that pitch type and location. Use the C to follow the pattern as shown, while timing your motion with the outer ball icon for a good release point. A real-time feedback trail displays to indicate motion accuracy.

Pitching Controls – Pulse Interface

To use PULSE PITCHING, start by selecting your PITCH TYPE and moving the L to your desired location in the zone. Press A at the smallest point of the PULSE to increase the accuracy of the pitch as it is released.

Pitching Controls – Meter Interface

To use METER PITCHING, start by selecting a PITCH TYPE and moving the L to your desired location in the zone. Press A once to start the METER and again as the bar reaches the top of the METER to control PITCH POWER. Finally, set the PITCH ACCURACY by pressing A once the bar approaches the yellow line on the way back down.

Pitching Controls – Classic Interface

To use CLASSIC PITCHING, simply select your PITCH TYPE and move the L to your desired location.

Pitching Controls – Pure Analog Interface

To use PURE ANALOG PITCHING, start by selecting your PITCH TYPE and moving the L to your desired location in the zone. Next, pull BACK on the C to start the PITCH DELIVERY, then push FORWARD quickly or slowly to set the velocity. You can also adjust PITCH ACCURACY by moving the C LEFT/RIGHT during release.

Pitching Misc.